The Reverend Dak's +1 Blessed Warhammers for SALE!
Thread started by
the reverend dak at 07.8.09 - 4:59 pm
Usage of these Holy Weapons included fighting enemies, providing an additional 2d10 radiant damage to undead, and Bike Polo.
Each hammer is hand crafted, taped and blessed by me personally. They are rich with
Pelor's radiance and guidance. The tape is a signature Red & Gold representing the radiance of Pelor.
Contact me if you would like to own one of my +1 Blessed Warhammers.
(Details follow.)
rev DOT dak AT straycouches DOT com
----
I've come across a few aluminum ski poles and I have an available stock of ABS pipe. I have a couple mallets made NOW, but I will be making more. I'm broke as fuck so I can't give them away for free, otherwise I would. So I'm willing to make and sell (or trade) you a custom Blessed Warhammer. I just want to be able to pay for some beer (will accept beer in trade) and fuel the Bike Polo scene in LA.
They can be cut to any length, my standard is about 38 inches - depends on the length of the pole. I only have ABS (black pipe) at this time and I make them using a standard design I found online (See Pic.)
Barleye and Danya each have one of my mallets if you want to check them out.
I can also sell the poles separately if you want to make your own. I can cut them to any desired length and tape the end for you. I'd give them away or charge for just parts if I could, but I shouldn't because I'm broke. Real broke.
This is what I'm charging, I'm obviously not trying to get rich:
Blessed Warhammer (complete mallet): $10, cut to size, taped, built and blessed.
Additional Hammerhead: $5, cut & pre-drilled for your existing mallet.
Ready to use ski-pole: $5, cut, taped & pre-drilled (if desired.)
Just a ski-pole: $3, uncut.
Just the hammer head (5-6 inch): $2, cut to length, no drilling, no holes.
Email me if you have questions, suggestions, or for something really custom.
reply
I would like one made in XLTall please.
Roadblock07.8.09 - 5:02 pm
reply
haha... well before you do that maybe I should get sized? is there some kind of polo sizing chart out there? stoked on this. I've been meaning to get back out on the polo court havent had the chance since my accident
Roadblock responding to a
comment by the reverend dak
07.8.09 - 5:06 pm
reply
I don't think there is a "standard" for anything when it comes to DIY Bike Polo. The best I can do is make one from the longest ski-pole I have, and minimize cutting. But the longest pole possible will probably be too short for freakishly tall people.
I should be able to finish it today.
the reverend dak responding to a
comment by Roadblock
07.8.09 - 5:16 pm
reply
The mallet should be just long nough that you can reach out out 3 feet to the side of your bike and still reach the ground.
stillline07.8.09 - 5:24 pm
reply
I'll take the lightest one you have. Good price.
stillline07.8.09 - 5:25 pm
reply
Thanks for the endorsement Matt. I'll be able to cut them shorter if needed, no charge. Having them long enough is the biggest issue, i'd say.
I have standard standard aluminum poles from various brands. I'll pick out the lightest one, and if you know the length, let me know.
the reverend dak responding to a
comment by stillline
07.8.09 - 5:32 pm
reply
Doesn't look like the mallet is skinny enuff to stick into the spokes. Can I have one with a skinny end on it on one end?
User107.8.09 - 5:40 pm
reply
I'm stoked on my mallet...i'll be at the DTLA polo tomorrow night if anyone wants to check it out.
barleye07.8.09 - 6:41 pm
reply
Dak - Are the poles you're using standard ski poles or cross country? Watch out for the cross country poles, they're a straight tube, whereas the regular ones taper, which is why the heads don't wiggle or slide. You don't want none of that. Solid & sturdy is the way. The one you made for Danya looked great. Haven't seen it since that night....
DANYA COME BACK TO POLO WE MISS YOU!
kryxtanicole responding to a
comment by barleye
07.8.09 - 6:51 pm
reply
Nice Dak! Bring me one...
skano07.9.09 - 12:26 am
reply
Sweet deal, what with the local supply of thrift store ski-poles exhausted since 2000.
Hopefully you still have some of these whenever I get down there again.
bentstrider07.9.09 - 12:42 am
reply
@Skano, will do, sir. Do you have a preference on a length?
How about you, Stillline?
the reverend dak responding to a
comment by skano
07.9.09 - 4:20 pm
reply
@ ROADBLOCK I have a very long ski pole at my house. TC4TB and I kept it around thinking someone would need it.
parlorbikes07.9.09 - 4:23 pm
reply
@bent, let me know when you come back down, what ride, and the length you want the pole. I make mine between 36" and 40".
Roadblock's is a manly 42".
the reverend dak responding to a
comment by bentstrider
07.9.09 - 5:26 pm
reply
Roadblock and Stillline, your mallets are ready. Shall I bring them to MR tonight?
July, yours? Does Chynna know?
I don't have any time to make any today, but I will be able to make more next week. Anyone?
The Reverends @ Killradio.org, 2-4PM Today, (Fridays)
the reverend dak07.10.09 - 12:06 pm
reply
what enchantments does it have?
snowcone07.10.09 - 12:20 pm
reply
Reverend Dak,
I need one constructed by for able hands and blessed by your pure soul.
~Rev.Mook
Mook responding to a
comment by snowcone
07.10.09 - 12:51 pm
reply
Ah I fucked that up... Leme try that again.
Reverend Dak,
I need one constructed by your able hands and blessed by your pure soul.
~Rev.Mook
Mook07.10.09 - 12:52 pm
reply
woaH!! awesome Dak! I wish i weren't so scurrred of falling! This gear might inspire me to give it a shot...but uh....what colors does it come in??? jaja.
mixtemotions07.11.09 - 1:04 pm
reply
Can I have one for myself?
I am about 5 foot 7 or something.
Yellow tape if I can request it.
I have a 24 pack of PBR to drink with you as payment. I can pay cash if needed also.
I really want 2 mallets so I can bring an extra each time. If I give you cash and beer, can we work this out? If not, maybe a "+2 Hammer of the Gods"? A special mallet would be a treasure to me.
Thanks Dak!
TheDude07.11.09 - 2:50 pm
reply
I WANT THE "SCOTT" ONE, PAYPAL?
X-Large responding to a
comment by TheDude
07.11.09 - 2:59 pm
reply
DUDE, sure thing. I should have it ready by next week. I think I'll try to make something extra special +2 for sure.
the reverend dak responding to a
comment by TheDude
07.11.09 - 3:04 pm
reply
X-Large, I'm all out of SCOTT ski-poles, I only have 2 poles left! They're both silver, by the time they're taped up you won't be able to read any branding.
As of today I'm sold out of mallets.
July owes me $10. Chynna has your mallet.
The last ones are for Skano, TheDude and X-L. They'll be done next week.
I'll bump this thread when I come up with more.
the reverend dak responding to a
comment by X-Large
07.11.09 - 3:12 pm
reply
THANK YOU GREAT REVEREND DAK!
I feel special now.
TheDude responding to a
comment by the reverend dak
07.11.09 - 3:28 pm
reply
Thankyou thankyou mr. Dak for my awesome polo mallet. I have it proudly displayed in my apt. I can't wait to use it. Thankyou once again sir.
Roadblock07.11.09 - 4:40 pm
reply
hell Yeah, ReV DaK! I take a 37 but only make me one if you have extra material.. i have a couple of good mallets at the time. I can't wait for you guys to come up next week!!! I'm supa Excited!!!
skano responding to a
comment by Roadblock
07.11.09 - 4:58 pm
reply
-->
Ridazz Roulette!
