WTB: quill stem
Thread started by
roscoeRIDAZZ at 09.29.09 - 10:21 pm
I'm willing to pay from $10-25 for a decent quill stem,
120mm at the least, 160mm at the most in length.
26.0 clamp size is perfect..unless you think anything less will get my 26.0 bullhorns clamped.
setxmatchxrun@hotmail.com
reply
these are hard to find in that length, unless you order new from your LBS
and holy shit, if you need a 160 you need a bigger bike
richbell09.29.09 - 11:13 pm
reply
Also, what size is the internal diameter of your fork? That can vary quite a bit from bike to bike.
Try one of the bike co-ops, they usually have a variety you can try.
JB09.29.09 - 11:23 pm
reply
I seen Paul at the bicycle swapmeet, with a box full of quill stems!
speedybrian200009.30.09 - 12:08 am
reply
yes. I have new and used stems
Atomic Cycles
17322 Saticoy
Van Nuys ca 91406
rev106 responding to a
comment by speedybrian2000
09.30.09 - 8:35 am
reply
If you're still looking in a week hit me up. I'm replacing my 120mm quill stem with a 90mm. It's a matte pewter ITM with a Bianchi pantograph on the side came off an early 90s Bianchi, 120mm and currently holds 25.4mm drops so it would work for your bullhorns.
nancine09.30.09 - 6:21 pm
reply