se draft?
Thread started by
itsdefnit at 03.1.10 - 5:01 pm
does anybody have one of these???
do the stock pedals take cages?
reply
they do not. and even if they did, why would you wanna put them on those? the brake real fast
LouisAve03.1.10 - 6:50 pm
reply
i got one off of craigslist a few months back but the guy i bought it from had some huge ass primo bmx pedals, which were cool but i just miss having cages on my bike. and i can't seem to find any pedals that will fit that stupid stock crank it comes with. i have some origin 8 pedals that take cages, but they don't fit the crank : (
itsdefnit03.1.10 - 10:37 pm
reply
oh you still have that one piece crank then you'll need to convert it to a 3 piece
get a euro bottom braket whatever its called then you'll need a new crank then you can put those pedals.
LouisAve03.1.10 - 11:24 pm
reply
it already has a 3 piece euro style crank, i have a draft lite, not a regular draft.
itsdefnit03.2.10 - 7:31 am
reply
what kind of crank do you have?
you should be able to put your pedals in.
LouisAve responding to a
comment by itsdefnit
03.2.10 - 10:27 am
reply
have you installed pedals before?
1/2" pedals are typically for 1-pc cranks. You'll know these pedals wont fit your crank if they slide in the crank; you couldnt thread them if you wanted to (they're just too small). If thats the case.... you need different pedals (9/16).
9/16" these should fit your crank. My guess is maybe you dont realize the left side crank arm is reverse threading. Try tightening the pedal on the left side going counter-clockwise.
If neither of the above help, then take it to a shop or add some photos.
md203.2.10 - 10:54 am
reply
OK the pedals i have on my bike are primo strciker pedals there the one's pictured and the origin 8 pedals i have are the pro track light pedals they say there 9/16". however, the part that screws into the crank for the primo pedals is thinner than the origin 8 pedals. so i'm totally confused as far as size goes... for pedals for my crank.
itsdefnit03.2.10 - 6:35 pm
reply
OK the pedals i have on my bike are primo strciker pedals there the one's pictured and the origin 8 pedals i have are the pro track light pedals they say there 9/16". however, the part that screws into the crank for the primo pedals is thinner than the origin 8 pedals. so i'm totally confused as far as size goes... for pedals for my crank.
itsdefnit03.2.10 - 6:51 pm
reply
OK the pedals i have on my bike are primo strciker pedals there the one's pictured and the origin 8 pedals i have are the pro track light pedals they say there 9/16". however, the part that screws into the crank for the primo pedals is thinner than the origin 8 pedals. so i'm totally confused as far as size goes... for pedals for my crank.
itsdefnit03.2.10 - 6:53 pm
reply
OK the pedals i have on my bike are primo strciker pedals there the one's pictured and the origin 8 pedals i have are the pro track light pedals they say there 9/16". however, the part that screws into the crank for the primo pedals is thinner than the origin 8 pedals. so i'm totally confused as far as size goes... for pedals for my crank.
itsdefnit03.2.10 - 6:54 pm
reply
^^^^^^^^^stupid gay netbooks.....
my pedals are 1/2" just checked them out... i was too lazy to go outside... is there anyway to switch those parts out?
itsdefnit03.2.10 - 6:57 pm
reply
drill and tap crank to 9/16
1/16 larger in diameter size
Dedicated818 responding to a
comment by itsdefnit
03.2.10 - 7:09 pm
reply
Ya I'm running 9/16 pedals on one piece BMX cranks that are on my
Coaster Brake Challenge Schwinn.
Dedicated818 responding to a
comment by itsdefnit
03.2.10 - 7:47 pm
reply
-->
Ridazz Roulette!
